02 Santa FE LX AWD light out on shift plate, what size bulb and how to get to it?

Discussion in 'Hyundai Santa Fe' started by Matthew Rebbert, Sep 8, 2005.

  1. Matthew Rebbert

    Matthew Rebbert Guest

    Hey all I have a 2002 Santa FE LX AWD and on the shift plate the PRND no
    longer illuminates. I tried to get to it by unscrewing the screw on each
    side of the console but I cant get it off due to the ashtray console being
    in the way. I unscrewed the 2 on the ashtray but I still can't get the
    ashtray assembly off. Is there another way, am I missing something? Any
    help would be appreciated.

    Matthew Rebbert
     
    Matthew Rebbert, Sep 8, 2005
    #1
  2. Matthew Rebbert

    hyundaitech Guest

    The lower center panel (the one into which the ash tray inserts) pulls out
    once the two screws behind the ashtray are removed, but the clips are very
    tough and too much twisting will break the plastic. I usually put a small
    screwdriver between the radio and trim and pry the trim out. I find that
    tends to be the most friendly regarding marking the dash.
     
    hyundaitech, Sep 8, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help! - 2002 Accent 3rd Brake Light Bulb Burned-Out

  2. How to get radio out

  3. change light bulb in Third stop light. 06 Sonata

  4. How to change fog light bulb on 2001 Accent?

  5. Hyundai Tech - How do you replace the center brake light bulb?

  6. 06 Sonata cabin air filter -how the !@#$ do you get it out?

  7. HYUNDAI: CHRONIC ELECTRIC SYSTEM/Light Bulb Failure! How About ARECALL?

  8. 2016 Santa Fe Limited AWD lug nut size

Loading...