2000 Hyundai Trajet 2.0i fitting with WAECO MS50 cruise control.

Discussion in 'Hyundai Trajet' started by Dick, May 21, 2007.

  1. Dick

    Dick Guest

    I had a Waeco MS50 cruise-control in my 1.8I 1996 Lantra wagon. I had the
    wiring diagram of this car and it was an easy job to install the cruise
    control. The speed pulse wire was a yellow/white wire. There was a little
    vacuum hose marked with a white line where to cut it to mount he cruise
    control servo.


    Last week I have bought a 2000 Trajet 2.0i and want to do the same trick,
    but I have no wiring diagrams so I have some questions;
    1. where does Hyundai mount the original cruise control unit in the Trajet?
    2. where do I find the wire with te speedpulse signal and what color has
    this wire?
    3. which vacuum hose is normally used for the vacuum for the cruise control

    Who can help me?

    Dick, May 21, 2007
  2. Dick

    Dick Guest

    Thanks to the help of a mechanic of the local Hyundai dealer my problem is
    The speedpulse wire is the brown wire of the black connector under the
    The vacuum is taken of the vacuum hose to the break servo.
    I mounted the cruise control on the cover under the steering wheel.

    The cruise control is functioning perfect.

    Dick, May 22, 2007
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.