2001 Sonata

Discussion in 'Hyundai Sonata' started by Fizzo, Feb 18, 2005.

  1. Fizzo

    Fizzo Guest

    I need to change the Spark Plug Wires on 2001 Sonata. Trying to save some
    $$$. Need some advice on the difficulty of doing this myself.

    Thanks.
     
    Fizzo, Feb 18, 2005
    #1
  2. Fizzo

    BillyGoat Guest

    I have changed the plug wires on a 99 4Cyl and it was a piece of cake. The
    hardest problem is finding the wires someplace other than the dealer who
    wants a arm and a leg for them.
    bill
     
    BillyGoat, Feb 19, 2005
    #2
  3. Fizzo

    hyundaitech Guest

    Which engine do you have? The 2.4 4 cyl is very simple. The 2.5 V6
    significantly more difficult, but can be done by someone who has
    reasonable experience disassembling and reassembling minor components.
     
    hyundaitech, Feb 19, 2005
    #3
  4. Fizzo

    Fizzo Guest

    Thanks for the reply. It's a 2.5 V6.
     
    Fizzo, Feb 21, 2005
    #4
  5. Fizzo

    hyundaitech Guest

    You'll need to remove the upper intake (plenum) to access the rear plugs
    and wires. If you do this, take great care to not drop anything into the
    open intake holes -- many techs cover them with a rag to prevent anything
    from accidentally dropping inside the engine.
     
    hyundaitech, Feb 21, 2005
    #5
  6. Fizzo

    Fizzo Guest

    Thanks.
     
    Fizzo, Feb 21, 2005
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.