2002 Santa FE Fan Switch

Discussion in 'Hyundai Santa Fe' started by Ronald Saunders, Oct 25, 2004.

  1. Subject switch has quit working 3 times now, normally came back to life
    after a day or 2, now dead. Pushing in hard on switch seemed to power it
    momentarily between 3 and 4 speed, but now dead again. Is this a problem
    others have encountered, if so, what was the problem/solution.
     
    Ronald Saunders, Oct 25, 2004
    #1
  2. Ronald Saunders

    hyundaitech Guest

    If you can (or could) correct it by monkeying with the switch, the problem
    is nearly 100% to be in the switch.
     
    hyundaitech, Oct 25, 2004
    #2
  3. Doesn't matter what I do with switch now, doesn't work. Dealer said it was
    blower motor, but I would have to verify that myself, they are awful eager
    to sell parts with 400% markup
    Just have to put 12V across the motor terminals and see if it works
     
    Ronald Saunders, Oct 27, 2004
    #3
  4. Ronald Saunders

    hyundaitech Guest

    Even easier, unplug the blower motor and attach a voltmeter to the
    terminals. Turn the fan on (key on, of course). If you have 12 volts,
    it's the motor. If not, it's somewhere else.
     
    hyundaitech, Oct 27, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.