2008 Santa fe 2.7 Oil Valve Control Leaking

Discussion in 'General Motoring' started by sgarcia, Apr 30, 2019.

  1. sgarcia

    sgarcia

    Joined:
    Apr 30, 2019
    Messages:
    1
    Likes Received:
    0
    I have a 2008 santa fe 2.7 GLS. It seems the oil control valve is leaking oil. The one on the rear cylinder bank. I tried to replace but where the Plenum sits is blocking the removal. It almost seems I would have to remove the plenum and the intake manifold. Can you tell me how to remove without having to tear down the plenum and intake manifold. Both oil control valve face toward middle of cylinder block The OCV in the front seems easier to replace. Please provide instructions and diagrams or pics to assist. Thanks
     
    sgarcia, Apr 30, 2019
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PCV valve and oil consumption

  2. Leaking doors

  3. 07 Santa Fe Limited Oil Aluminum V6 oil filter Location

  4. transmisson oil leaking under radiator 2003 XG350

  5. Trunk leaking 2003 Elantra

  6. Is a leaking Power Steering Hose covered under the 100 k. DrivetrainWarranty ?

  7. Matrix coolant leaking.

  8. Roof leaking on the interior, possible drainage hole block

Loading...