2009 Santa Fe Alignment Issue

Discussion in 'Hyundai Santa Fe' started by tdeanjohn50, Jun 19, 2017.

  1. tdeanjohn50

    tdeanjohn50

    Joined:
    Jun 19, 2017
    Messages:
    1
    Likes Received:
    0
    I rotated the tires on my 2009 Santa Fe and noticed the inside edge of both front tires was wearing excessively. I took it to Brakes Plus to do a 4 wheel alignment. They said they could not do the front camber adjustment because this vehicle comes from the factory without being able to adjust it. They charged me for the regular alignment and then quoted me a price of $98 material and labor to install an EZ Cam XR 14mm kit in order to adjust the front camber The current front camber measurement is -1.7 degrees on right side (out of spec) and -0.7 degrees on left (in spec).
    Does this sound legit or am I being taken advantage of?
     
    tdeanjohn50, Jun 19, 2017
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.