'97 Excel Stereo removal

Discussion in 'General Motoring' started by Danny, Dec 9, 2005.

  1. Danny

    Danny Guest

    Want to replace the stereo (with removable facia) .Step by step instructions
    and warnings anyone?
     
    Danny, Dec 9, 2005
    #1
  2. Danny

    hyundaitech Guest

    You'll need to pull the glove box and remove all the cables from the heater
    box (one behind the glove box) and two on the (I believe left) side.
    Remove the two screws from behind the ashtray and pull the facia out.

    Be sure to take the cables loose first. If you don't you will damage them
    or your heater control. Try to pull the facia out as squarely as possible.
    This will help keep from breaking the retaining tabs. Also, keep on the
    lookout for other hidden screws. I believe the two I mentioned are the
    only two, but be gentle just in case.
     
    hyundaitech, Dec 12, 2005
    #2
  3. Danny

    Danny Guest

    Great Stuff,
    Since it's the daughters/wifes car I really want to avoid the 10lb hammer
    method.

    Thanks for the help
     
    Danny, Dec 13, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 03 Elantra Aftermarket Stereo

  2. Replacing stereo 2000 Elantra

  3. 96 accent Stereo Removal

  4. Tiburon Infinity CD stereo system

  5. XG350 stereo compatability

  6. Stereo Wiring Diagram 94 Excel

  7. 05 Sonata stereo trim removal?

  8. Removal of stereo

Loading...