I DON'T KNOW IS THEY STARTED AT THE SAME TIME BUT MY BRAKELIGHTS (TWO REAR AND UPPER) AND THE CRUISE CONTROL ARE ALL NOT WORKING. THE FUSES SEEM TO BE FINE AND AFTER CHECKING THE WIRING DIAGRAM AND SEEING THAT THESE TWO FUNCTIONS ARE ON THE SAME WIRING CIRCUIT, I REPLACED THE BRAKE SWITCH WHICH IS ACTIVATED BY THE BRAKE PEDAL. STILL NOTHING. ANY IDEAS?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
99 ELANTRA STOPLIGHTS/CRUISE CONTROL
- Thread starter aj
- Start date
Matthew Rebbert
Usenet Archive
- Joined
- Jan 22, 2005
- Messages
- 43
- Reaction score
- 0
AJ,
You can try replacing the light bulbs for the rear brakes. I had an 02 Elantra GT which I had a tail lamp go out and the back 3rd brake light did not work and cruise control did not work. Replaced bulb and it all worked again. Might not be it, but its a $1.00 15 minute procedure that might work.
You can try replacing the light bulbs for the rear brakes. I had an 02 Elantra GT which I had a tail lamp go out and the back 3rd brake light did not work and cruise control did not work. Replaced bulb and it all worked again. Might not be it, but its a $1.00 15 minute procedure that might work.