AC Compressor Clutch

Discussion in 'Hyundai Santa Fe' started by LubeckTech, Mar 26, 2020.

  1. LubeckTech

    LubeckTech

    Joined:
    Dec 27, 2017
    Messages:
    3
    Likes Received:
    0
    Could anyone tell me how to figure out why the AC compressor clutch is not engaging in our 2010 Sante Fe??
     
    LubeckTech, Mar 26, 2020
    #1
    1. Advertisements

  2. LubeckTech

    avisitor

    Joined:
    Jul 30, 2017
    Messages:
    426
    Likes Received:
    22
    Location:
    Albany, NY
    Check youtube for how to test ac compressor clutch
     
    avisitor, Mar 27, 2020
    #2
    1. Advertisements

  3. LubeckTech

    LubeckTech

    Joined:
    Dec 27, 2017
    Messages:
    3
    Likes Received:
    0
    Last night I located the fuses and relay that activates the A/C clutch.
    Fuses were good and I pulled the relay and checked the coil which measured about 110 ohms.
    Voltage is present at the relay coil and contacts. With the engine running and A/C I slowly plugged the relay in and could not feel it click. I measured the voltage at the relay coil socket terminals and got 14v on one side which is good and 2.5v on the other side that did not change when I switched A/C on and off. So at this point I am thinking a fault in the climate control module. I have not yet jumped the relay contact terminals to see if the compressor clutch will engage.
     
    LubeckTech, Mar 27, 2020
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.