Blend door actuator

Discussion in 'Off-Topic Chat' started by rholmes, Feb 4, 2020.

  1. rholmes

    rholmes

    Joined:
    Feb 4, 2020
    Messages:
    1
    Likes Received:
    0
    I have a 2016 Hyundai Tucson. The AC works great and I can change vents to floor, window etc. My problem is it will not blow heat when I turn the knob to heat. I am thinking the blend door actuator??? Can't find any videos on where it is located. any help would be great!!! Thank you.
     
    rholmes, Feb 4, 2020
    #1
  2. rholmes

    Hanson771

    Joined:
    Feb 22, 2024
    Messages:
    3
    Likes Received:
    0
    Location:
    London
    I'm also looking for a solution
     
    Hanson771, Feb 26, 2024
    #2
  3. rholmes

    Henderson Noa

    Joined:
    May 22, 2024
    Messages:
    3
    Likes Received:
    3
    Location:
    Helsinki, Finland
    Your suspicion about the blend door actuator is a good starting point. The blend door actuator is responsible for controlling the airflow through the heater core and the AC evaporator, effectively regulating the temperature inside the cabin. If it’s malfunctioning, it could be stuck in the position that only allows cool air to pass through.
     
    Henderson Noa, May 22, 2024
    #3
    Edwards Damon likes this.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is it true you can only have two remote door locks for a Santa Fe?

  2. 98 Sonata Fuel Fill Door

  3. Driver Side Passenger Door

  4. Anybody try Penzoil ATF (synthetic blend) in their Hyundai?

  5. 2006 Hyundai Accent - 4 Door and 3 Door Hatchback

  6. Door panels on a 1999 1.5 Accent 2 door sport

  7. 2001 door power door lock dont work

  8. 2012 ix35 Throttle actuator fault.

Loading...