Calling diesel heads

Discussion in 'General Motoring' started by rufty_tufty_hoolythug, Aug 5, 2009.

  1. My wife has an Hyundai Accent 1.5 Diesel 2002 model. Shortly after
    buying it, it would not start for me when I left work. I cranked it 4
    or 5 times and got nothing. I went back into my office, left it ten
    minutes, went back out and it started as if nothing had happened.

    That was quite a few weeks ago. Yesterday my wife was out in the car
    and on leaving the local Tesco it would not rev. The throttle pedal
    did nothing. She called the RAC who came out and basically fiddled
    about and the car start revving again and carried on as if nothing had
    happened. The RAC man said that he had hadn't actually done anything
    to get it going again.

    Does anyone have any ideas as to what's going on? While on the
    subject, what's the best way to change a diesel fuel filter? I've
    heard bad things about disturbing a diesel's fuel supply and setting
    up airlocks which I think changing the fuel filter is kind of going to
    do.
     
    rufty_tufty_hoolythug, Aug 5, 2009
    #1
  2. rufty_tufty_hoolythug

    CBX2 Guest

    I get 37-40 MPG with my 2000 Accent 3door gas model. I used to have a
    Nissan King Cab Diesel 1982 model that got 50MPG.What kind of milage are
    you diesel Accent guys getting? Wish we could get em here
     
    CBX2, Aug 6, 2009
    #2
  3. rufty_tufty_hoolythug

    Daisy Guest

    Well my Sonata runs about 37 m/gal over the year

    Daisy
     
    Daisy, Aug 6, 2009
    #3
  4. rufty_tufty_hoolythug

    Striker Guest

    As for the hard starting problems, does it have glow plugs or a grid
    preheater ? You may not be getting enough preheat. Diesels don't like cold
    engines. If it was anything else most likely it would not start at all.

    Changing fuel filters, Before putting the new filter on, fill it with clean
    diesel fuel then after installing, if it is a indirect injection engine
    bleed air from a fitting usually located on the injection pump. On direct
    injection engines usually there is a button near the injection pump called a
    priming pump or lift pump keep pushing until there is alot of resistance
    that will prime the injection pump. Any remaining air should bleed thru the
    injectors.

    Remember filters on a diesel are the most important PM item !

    I changed filters on different diesels from 3 cyl 29 hp farm tractor to 4000
    hp 20 cyl MTU diesel generators.

    2002 model would most likely be a turbo direct injection with a priming
    pump.

    Striker....
     
    Striker, Aug 7, 2009
    #4
  5. rufty_tufty_hoolythug

    Striker Guest

    Maybe Hyundaitech can put a good word in and get us some diesels in the
    US.....

    Turbodiesel Santa Fe - Now that's something Hyundaitech can't wait to work
    on : )

    The bigger the diesel the bigger the hernia !!!!!

    Striker...
     
    Striker, Aug 7, 2009
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.