Elantra 2000; Power steering belt noisy

Discussion in 'Hyundai Elantra / Lantra' started by Syl, Nov 4, 2007.

  1. Syl

    Syl Guest

    Hi,

    The power steering pump belt is slipping and very noisy if i turn the
    steering near it's limit. I replaced the belt two times with different
    models, and it's already there. The belt is very tight, and i use a
    belt conditionner, the problem is lighter but still there. I verified
    the shaft of the pump and it turns freely so the pump seems to be in
    good condition. What else could cause that? Is there a filter on the
    system? Is it possible that the steering rack is the source of this
    problem?

    Thanks.
     
    Syl, Nov 4, 2007
    #1
  2. Syl

    hyundaitech Guest

    Have you checked the water pump/alternator belt. The power steering is
    driven by the water pump, so a loose water pump belt could be (and usually
    is) the culprit.

    I also recommend against the use of belt dressing and conditioners. They
    tend to create more noise and problems than they solve. You may need to
    clean the pulleys off and replace the belt again.
     
    hyundaitech, Nov 5, 2007
    #2
  3. Syl

    Syl Guest

    Thanks for the tip, the problem was effectively the water pump/
    alternator belt.

    Regards.
     
    Syl, Nov 7, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.