Elantra turn/brake bulbs How do I access?

Discussion in 'Hyundai Elantra / Lantra' started by pwdguy, Sep 9, 2004.

  1. pwdguy

    pwdguy Guest

    Hi,
    I have a 2002 Elantra GT 4 door. One of my brake light bulbs burnt out. I
    opened the access cover inside the trunk and I'm not sure what to do next.
    Should I unscrew the 4 nuts that stick out? I would appreciate any help or
    suggestions. Thanks.

    Ed
     
    pwdguy, Sep 9, 2004
    #1
  2. pwdguy

    hyundaitech Guest

    There are three 8mm nuts you must remove. In the spot where there might
    have been a fourth nut, there's a plastic nipple. After removing the
    nuts, you may need to give the nipple a whack with a small hammer or
    something similar to get the tail lamp to come loose. There's a metal rod
    which snaps into the nipple from the outside and doesn't like to come back
    out.
     
    hyundaitech, Sep 9, 2004
    #2
  3. pwdguy

    pwdguy Guest

    Hi,
    I just finished changing the bulbs. Thanks for the help!!!
     
    pwdguy, Sep 11, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. LED bulbs

  2. replacing behind the dash light bulbs

  3. Turn signal flasher 2000 Elantra Wagon

  4. Hyundai Warranty- Light Bulbs

  5. Gauge panel bulbs

  6. Turn Signals: Didn't Work, Now OK. (04 Elantra GT)

  7. turn key on everything works, turn key to start and nothing happens

  8. Coffee in my 2006 Sonata under shift handle/gear box. How do I access area in front of cup holder?

Loading...