engine light

Discussion in 'General Motoring' started by gymmy2, Oct 28, 2007.

  1. gymmy2

    gymmy2 Guest

    Can anyone tell me how to reset the check engine light On a 2001
    Tiburon... it came on and had a #1 cylinder miss firing code showing
    on the meter I borrowed from a friend.....I fixed the problem it was a
    bad wire to that cylinder so I replaced all the wires along with the
    spark plugs...The car now runs fine but I don't know how to re-set
    light....thank you Michael
     
    gymmy2, Oct 28, 2007
    #1
  2. gymmy2

    lmcclaf Guest

    Remove the negative battery cable for a minute or so and then
    reconnect it. Or, borrow the code reader again and reset the light
    with that.

    Cheers,
    Lawrence
     
    lmcclaf, Oct 28, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Check Engine Light Reset?

  2. "Door open" light and "air bag" light on, on the Dash.

  3. change light bulb in Third stop light. 06 Sonata

  4. battery light and brake light together on

  5. digital clock, interior light, fog light not working...

  6. Brake Light and Battery Light On

  7. 2008 Accent Check Engine Light and Check Fuel Cap Light

  8. Check engine light on then blinking while engine vibrates

Loading...