Error code p0441

Discussion in 'Hyundai Accent' started by Mom of Four, Oct 14, 2018.

  1. Mom of Four

    Mom of Four

    Joined:
    Oct 14, 2018
    Messages:
    2
    Likes Received:
    0
    Hello all!
    Thanks for letting me drop in. I've had my 2016 Hyundai Accent for four months. Today after two hours parked and cooled the check engine light came on with start up. I stopped and restarted the car twice to see if it would remain, and it did. I took it to AutoZone and the code they pulled was: error code p0441. The car just had an oil change and inspection last Saturday 06 Oct 2018, everything was fine. Also run on an eight hour trip the following day, no issues. Today it was only run for approx. 15 min before the 2 hour shutdown. Any ideas? Appreciate all help in advance.
     
    Mom of Four, Oct 14, 2018
    #1
  2. Mom of Four

    avisitor

    Joined:
    Jul 30, 2017
    Messages:
    426
    Likes Received:
    23
    Location:
    Albany, NY
    The code relates to the Evaporation emissions system.
    Sometimes it is as simple and re-tightening the gas cap
    Other times replace the purge valve.
    And it could be a different part of the evap system.

    Right now, just re-do the gas cap and erase the DTC code.
    Can be done by disconnecting the battery for 5 minutes
    Or using a code reader to erase.
     
    avisitor, Oct 15, 2018
    #2
  3. Mom of Four

    Mom of Four

    Joined:
    Oct 14, 2018
    Messages:
    2
    Likes Received:
    0
    Good deal! Thank you! I've tightened the gas cap, nothing. I'll try the battery option tomorrow when it's not raining.
     
    Mom of Four, Oct 16, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.