K
Ken
Just put new pads and rotors on the car, now I have a bad pluse in the
brake pedal when applied lightly. Any ideas?
brake pedal when applied lightly. Any ideas?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
M
Me
Check to make sure the rotors are on properly. I did the same thing and
the rotors did not go on squarely over the hub. I was surprised as well but
that's what the dealer told me and it was true.
Steve
the rotors did not go on squarely over the hub. I was surprised as well but
that's what the dealer told me and it was true.
Steve
H
hyundaitech
Your two choices are pretty much faulty rotor or faulty rotor installation.
K
Ken
I called the part store where I purchaed the rotors, took them back,
had them turned and all is well. I was told their supplier received a
bad batch, and this must of been part of the batch. Since it's a
family run store, they took care of the problem for me. I've done
many brake jobs in my time, and did not know one could put a rotor on
wrong. Thanks for the tips!!
had them turned and all is well. I was told their supplier received a
bad batch, and this must of been part of the batch. Since it's a
family run store, they took care of the problem for me. I've done
many brake jobs in my time, and did not know one could put a rotor on
wrong. Thanks for the tips!!
L
LandB
If there is any rust or dirt on the mating surfaces, there could be
considerable run-out.
So, maybe not put on wrong, just oversight.
considerable run-out.
So, maybe not put on wrong, just oversight.