Fuel light

Discussion in 'Hyundai Accent' started by Lisa68, Mar 17, 2018.

  1. Lisa68

    Lisa68

    Joined:
    Mar 17, 2018
    Messages:
    3
    Likes Received:
    0
    Hello everyone. Im new here and thought i ask a quick question. I just had my fuel sensor replaced some weeks ago. I've notice the last 2 times that i have put gas in my car the gauge isn't moving right away. The guage slowly moves after ive driven a few miles and it may not catch up until the next day. Now my gas light is on and i just put gas in twice but the gauge moved down instead of up. What else could it be? I have a 2013 accent.
     
    Lisa68, Mar 17, 2018
    #1
  2. Lisa68

    avisitor

    Joined:
    Jul 30, 2017
    Messages:
    426
    Likes Received:
    24
    Location:
    Albany, NY
    Sounds like the sending unit was installed improperly.
    If you had the work done at a garage then maybe have a conversation with them.
    If you did the work yourself then you may have to go into again.

    However, be aware that it isn't unusual for the gas gauge to take a little time to register the fill.
    You can try to fill the tank while having the engine running. It should be faster.
     
    avisitor, Mar 17, 2018
    #2
  3. Lisa68

    Lisa68

    Joined:
    Mar 17, 2018
    Messages:
    3
    Likes Received:
    0
     
    Lisa68, Mar 19, 2018
    #3
  4. Lisa68

    Lisa68

    Joined:
    Mar 17, 2018
    Messages:
    3
    Likes Received:
    0
    I took it back to the shop that originally fixed it and was informed the sendor was defective. So they will be getting another sender tomorrow. Thanks.
     
    Lisa68, Mar 19, 2018
    #4
  5. Lisa68

    avisitor

    Joined:
    Jul 30, 2017
    Messages:
    426
    Likes Received:
    24
    Location:
    Albany, NY
    I hope they will cover the expenses of replacing the sending unit???
     
    avisitor, Mar 19, 2018
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.