Gauge/Horn issue. 07 Accent - Hyundaitech please help!

Discussion in 'Hyundai Accent' started by wr3ck3d, Oct 26, 2006.

  1. wr3ck3d

    wr3ck3d Guest

    Have an 07 Accent 3dr. Was driving down the road at approx 80kph.
    Beeped the horn in a few (4-6) short blasts and the Parking Brake light
    came on and all gauges (gas, speed, temp, revs) reset to zero and
    quickly returned to the position they should be in. I've been able to
    do this a few more times and I'm sure I could again. Any ideas?
    Everything works fine as this happens, no change in power, speed, revs,
    etc etc.

    Please Help!
     
    wr3ck3d, Oct 26, 2006
    #1
  2. wr3ck3d

    hyundaitech Guest

    Sounds like a poor ground or power issue that is aggravated when you honk
    the horn. All the stuff you list would normally occur when initially turn
    the key to the on position-- it's the check procedure that occurs on
    power-up. Time for a visit to your friendly neighborhood dealer.
     
    hyundaitech, Oct 26, 2006
    #2
  3. wr3ck3d

    Mike Marlow Guest

    Help provided - it's under warranty... take it to the dealer.
     
    Mike Marlow, Oct 26, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2001 Accent GL won't start!!!! Please help me!

  2. 2000 Accent Clutch or Tranny problems. PLEASE HELP!!!!!

  3. SANTA FE GAS GAUGE PROBLEMS...HELP!!

  4. Horn won't stop - Help

  5. Familiar refrain of HyundaiTech...Please Help filters in from afar.

  6. Remote Lock, Horn answer back (HYUNDAITECH??)

  7. Hyundaitech - please provide thoughts on this issue

  8. XG300 sets code 1151, Help please Hyundaitech?

Loading...