How Hard to Change Transmission on Elantra?

Discussion in 'Hyundai Elantra / Lantra' started by Von Fourche, Jan 13, 2005.

  1. Von Fourche

    Von Fourche Guest

    I have a 2000 Hyundai Elantra front wheel drive. The transmission needs
    changed. How hard would it be to take it out myself and put it back in
    after a professional fixes it? Or is this something an auto shop should
    definitely handle?

    Thanks
     
    Von Fourche, Jan 13, 2005
    #1
  2. Von Fourche

    hyundaitech Guest

    An auto shop would definitely handle this. It would be difficult but
    possible in your driveway I think. You'll need to remove three of the
    four mounts holding the engine/trans assembly, so you'll need to keep the
    engine supported. Shop around on reman installation prices. Be sure to
    check your dealer. Hyundai keeps the price on the reman unit fairly low,
    so the dealer can resell it at a reasonable price. I figure the unit
    costs about $1100 and the labor to install would be about $700 at the
    dealer where I work, and we're in the high rent district.
     
    hyundaitech, Jan 14, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 99 Elantra Transmission Fluid Change

  2. Elantra alternator belt pulley grinding when reversing hard

  3. Random but frequent hard/no starts - 93 Elantra

  4. '99 Elantra....intermittent hard starting

  5. how many hours to change one front wheel bearing on 98 elantra, thanks

  6. How hard is it to replace piston rings?

  7. How to change the brakes pads on Elantra

  8. 2002 Elantra VE Manual Transmission oil change:

Loading...