Ignition fuse blowing

Discussion in 'Hyundai Accent' started by Robert walton, Nov 16, 2017.

  1. Robert walton

    Robert walton

    Joined:
    Nov 16, 2017
    Messages:
    1
    Likes Received:
    0
    Hi, I have a 2005 accent and a couple weeks ago I tried to start my car and it started to crank then it stopped. The dashboard lights and radio did not work and found out that my 30amp ignition fuse blew. The dome lights continued to work, but nothing else. I put another ignition fuse in and when I turned the key to start, the fuse immediately blew. As long as I dont try to start the car the fuse doesn't blow. Could it possibly be the starter even though I put a rebuilt starter in 7 months ago and had no issues at all. Or could it be a wiring issue with the ignition switch? I need help desperately so I give my dad his car back.
     
    Robert walton, Nov 16, 2017
    #1
  2. Robert walton

    avisitor

    Joined:
    Jul 30, 2017
    Messages:
    426
    Likes Received:
    23
    Location:
    Albany, NY
    You have got to troubleshoot the short in the starting circuit or ignition circuit
    Where ever the 30 amp fuse goes to
    A schematic would help and a multi-meter or test light
     
    avisitor, Nov 17, 2017
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Air Conditioner not Blowing Sufficiently

  2. Sonata fuse question

  3. 2000 Hyundai Sonata GLS radio fuse constantly blowing

  4. 03 Tiburon radio, dome light, clock fuse, where ?

  5. fuse layout

  6. Blowing 60amp Fuses

  7. 1994 Hyundai Scoupe blowing Fuse

  8. runs on two cylinders, blowing ECU, no spark

Loading...