Installation of '00 sonata power window regulator

Discussion in 'Hyundai Sonata' started by Bobby, May 4, 2006.

  1. Bobby

    Bobby Guest

    Hi Friends,

    I have 2000 hyundai sonata GLS. The left front power window regulator
    isn't working. So I bought a new one.
    I need help in installing power window regulator. I would appreciate if
    you can give some step by step detail for installation. Any special
    TIPS would be very helpful.

    Thanks.
     
    Bobby, May 4, 2006
    #1
  2. Bobby

    hyundaitech Guest

    It's pretty simple.

    Remove the door panel and peel the plastic splash guard away.

    Unbolt the window from the regulator and tape it to hold it up or remove
    the glass from the door.

    Unplug the motor.

    Remove the four regulator nuts and the three motor nuts and remove the
    assembly throught the big hole in the bottom of the door.

    Remove the three screws holding the motor to the regulator and install
    motor on new regulator.

    Installation is the reverse of removal.
     
    hyundaitech, May 6, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 91 Excel manual window regulator

  2. 2000 Sonata power window regulator

  3. 99 Elantra - window regulator

  4. Replaced broken window regulator, but woindow comes out of track

  5. 1994 Elantra window regulator

  6. 1994 Elantra window regulator

  7. Santa Fe window regulator/motor

  8. 2006 Sonata lost another window motor/regulator

Loading...