keyless programming

Discussion in 'General Motoring' started by baldie, Oct 18, 2003.

  1. baldie

    baldie Guest

    Does anyone know how to program a 2002 sonata remote?
    thanks
    Denny
     
    baldie, Oct 18, 2003
    #1
  2. baldie

    Jason Guest

    I believe it has to be taken to the dealer for programming.
     
    Jason, Oct 18, 2003
    #2
  3. baldie

    baldie Guest

    Thanks, I was hoping you could do it yourself like my GM
    baldie
     
    baldie, Oct 18, 2003
    #3
  4. baldie

    XGCA Guest

  5. baldie

    baldie Guest

    Mine is the 2002 sonata, will try it and see if it works though.
    Thanks for the info.
     
    baldie, Oct 19, 2003
    #5
  6. baldie

    XGCA Guest

    Notice it says "All models" under models,
    It should work.

    XGCA
     
    XGCA, Oct 19, 2003
    #6
  7. baldie

    baldie Guest

    Thanks for the reply, can't determine If I would have to purchase the valet
    switch or not, I looked under the dash in mine and did not see anything like
    the illustrated, what do you think
     
    baldie, Oct 19, 2003
    #7
  8. baldie

    theta00k Guest

    Look for a white "multipurpose check connector" under the dash.
    You need to ground the code-save pin to put the receiver in the
    programming mode.
     
    theta00k, Oct 20, 2003
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.