New 99 Sonata Keyless entry question

Discussion in 'Hyundai Sonata' started by 99trooper, Mar 5, 2005.

  1. 99trooper

    99trooper Guest

    Hello again.

    Ok I've confirmed that I have a keyless entry module still wired under the
    dash (thank you hyundaitech).

    I read TSB 99-90-011 (install, operation, and programing for 99 sonata
    keyless entry system) and TSB 01-90-011(programing Hyundai security
    systems). TSB 01-90-011 says I should get an audio sound between
    "flicks" of the of the valet switch, but I don't get any sound (I touch
    the black and which together to simulate the valet switch per TSB
    99-90-011---99-90-011 doesn't say anything about getting audio sounds
    between flicks of the valet switch.
    Should I get sound between flicks of the black and white wires together?
    Next I called the dealer for a price on keyless remotes he told me $45
    each I asked him the PN he gave me: 00265-11002. I told him I had PN
    (from the TSB): 00243-16110... He said they had those in stock but they
    had problems with those modules so they changed to the 00265-11002. The
    remote, or the whole unit? As I said before in a previous post the old
    owners never had a problem, I don't see any TSB saying anything about a
    problem with the old units, and I even called another Hyundai dealer and
    asked them about it. Why would the dealer not want to give me the keyless
    remotes that were turned in with the trade in (like the previous owners
    told me they were) instead of giving me a story about problems with the
    unit, so instead of selling me a problem, they just took it out?
     
    99trooper, Mar 5, 2005
    #1
  2. 99trooper

    hyundaitech Guest

    They didn't want to give them to you probably because they lost them.

    I've had trouble getting some units into programming mode and have had to
    replace the control module.
     
    hyundaitech, Mar 7, 2005
    #2
  3. 99trooper

    99trooper Guest

    Am I suppose to get an audible sound when entering the programing mode on
    the keyless entry only model, or just counting the number of times I tap
    the wires together?
     
    99trooper, Mar 7, 2005
    #3
  4. 99trooper

    hyundaitech Guest

    According to TSB 01-90-011, there should be a chirp unless it's a 2000
    Sonata system. Knowing that these were sometimes dealer installed, it's
    possible that a 2000 keyless unit was installed in your 1999, especially
    if it was installed a significant time after the vehicle purchase.

    Now that I think about it, I had to replace a few sirens as well.
     
    hyundaitech, Mar 8, 2005
    #4
  5. 99trooper

    99trooper Guest

    Thanks for your help on this (no help from my own dealer of course)... I
    did go out and purchase a key fob as they said I could return it if it
    didn't work (it was only $28 ). I flicked the wires together like it said
    in the TSB, I got no audible sounds between "flicks" but when I was done, I
    did have a programed remote that works to lock / unlock the drivers door
    (with key 1) then unlock the rest (with key 2) which gives a 2 pezio chirp
    for lock and 1 for unlock...More fuel for my fire when I go in to the
    dealer for the idler pully that they have to replace due to the buyers
    contract I have with them....Thanks again for your info, I couldn't have
    found this stuff out without your knowledge!
     
    99trooper, Mar 9, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.