My 2007 Hyundai Santa Fe will crank but not start, it was showing CODE P0105 but after I checked fuses in engine box, it shows no codes. I am at a loss. I guess I can have it towed after holidays to dealer for diagnostics but would rather not.
O7 2.7L V6 crank but no start
- Thread starter MEL72
- Start date
Don't know what is causing your no start issue.
Code P0105 is a MAP fault.
The output from the MAP is out of range of the input required by the ECU
It can cause rough idle. Rich or lean condition.
Haven't heard of it causing a no start condition
If you pulled fuses out then you may have pulled the ECU fuse out and there by reset the ECU.
Have you tried checking for spark or injector pulse?
Code P0105 is a MAP fault.
The output from the MAP is out of range of the input required by the ECU
It can cause rough idle. Rich or lean condition.
Haven't heard of it causing a no start condition
If you pulled fuses out then you may have pulled the ECU fuse out and there by reset the ECU.
Have you tried checking for spark or injector pulse?