P1124 Code

Discussion in 'General Motoring' started by Craig, Nov 22, 2006.

  1. Craig

    Craig Guest

    Shortly after I fixed the P0303 code problem, I got a P1124 code. If I
    disconnect the battery, the code goes away for approx. one day and comes
    back. I see that there are a lot of components involved with this code. Is
    there a common fix? Any help would be appreciated.

    Thanks,
    Craig
    96 Elantra
     
    Craig, Nov 22, 2006
    #1
  2. Craig

    hyundaitech Guest

    P1124 refers to a lean condition at idle. Since you repaired your intake
    leak with some rtv without removing the intake manifold-- that was my
    impression upon reviewing the P0303 thread-- you probably still have a
    small leak there that's not enough to generate a misfire.

    Since we've already established an intake manifold problem, I'd recommend
    starting with replacing the manifold gasket and then clearing the lamp to
    see if it comes back.
     
    hyundaitech, Nov 22, 2006
    #2
  3. Craig

    Craig Guest

    hyundaitech, you are the man, you are right on time again. Found another
    small intake leak, repaired it, no codes. Thank you for your expert
    diagnosis and help.
     
    Craig, Nov 25, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.