Question Hyundaitech 2002 Santa fe 4cyl auto 71000 MI.

Discussion in 'Hyundai Santa Fe' started by junkman2, Aug 24, 2005.

  1. junkman2

    junkman2 Guest

    My daughters Santa fe stalled and could start.I went to the car (300mi) and
    it cranked up and drove to dealer (35mi).The car would run as long as you
    didn't press the accelerator to much.The dealer codes say cam,crank
    sensors and misfire.The dealer wants to replace the sensors,coils,plug
    wires and timing belt($1400).The question is if the cam belt lost a tooth
    would not get the same codes.Thanks
     
    junkman2, Aug 24, 2005
    #1
  2. junkman2

    hyundaitech Guest

    The cam sensor code can be a direct result of the camshafts being out of
    time with the crank (possibly due to missing timing belt teeth).

    Misfire and crank sensor codes are questionable.

    Also be aware that if your engine is out of time, you may have damaged
    internal engine components.
     
    hyundaitech, Aug 25, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is drive different for 4cyl Sonata vs 4cy ElantraGT?

  2. Rented a Sonata 4cyl for test drive for weekend

  3. 2001 Hyundai Sonata 4cyl auto trans

  4. HyundaiTech 04 Accent auto tranny question

  5. Comments PLEASE - Sante Fe 4cyl gas milage +

  6. 2006 Sonata 4Cyl Cabin Air Filter Maintenance

  7. question for hyundaitech: question about hood release handle

  8. Sonata 2004 4cyl auto - Can't locate PCM for testing

Loading...