Rear power window on 2000 Elantra

Discussion in 'Hyundai Elantra / Lantra' started by The Chris, Apr 26, 2005.

  1. The Chris

    The Chris Guest

    Well, my rear power window stopped going 'up and down'. I've worked on
    these before (on other cars) and there's essentially a cable that makes it
    move. Besides scraping my hands up real bad, and getting all greasy, I was
    unable to reattach it.

    I've looked in the manuals, but, couldn't find how to do it... Any ideas??

    Thanks.
     
    The Chris, Apr 26, 2005
    #1
  2. The Chris

    hyundaitech Guest

    It'll depend on what's wrong. The most frequent failure is a broken window
    regulator requiring regulator replacement.
     
    hyundaitech, Apr 26, 2005
    #2
  3. The Chris

    The Chris Guest

    The cable definitely came off the bottom of the unit. It looks like the
    cable I'd use on the brakes of a 10-speed bike. However, it connects on
    the side that I can't see.

    The motor works fine..

    Thanks
     
    The Chris, Apr 26, 2005
    #3
  4. The Chris

    hyundaitech Guest

    You'll need a new regulator. The plastic holders on the regulators break,
    and then the cable comes off.
     
    hyundaitech, Apr 26, 2005
    #4
  5. The Chris

    The Chris Guest

    Okay, thanks. When you said 'Regulator', I thought it was something
    mechanical, like the motor...
     
    The Chris, May 16, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.