spark gap

Discussion in 'General Motoring' started by mk.kemkd, Nov 11, 2008.

  1. mk.kemkd

    mk.kemkd Guest

    hi every body.
    i need to know if i changed my spark for my car (Hyundai accent model
    2000 1500CC) from the NGK 1.1mm to 0.7mm (gap spark)
    this made difference in my engine.

    i was had heard sound (ping)-(detonation or rattle) in my engine
    although i used fuel octane 92.

    but now so little after changed the oil engine from the natural to
    synthesis and change the spark.

    but i afraid from this gap in the spark, making something wrong in my
    engine.

    * i have default code P1123
    not have lack in exhaust .
    evap was changed
    O2 sensor was changed
    and the volt in O2 1 650mV
    and volt in O2 2 550mV
    in the spec. if O2 volt between 0 : 1 V is ok i think this volt is ok
     
    mk.kemkd, Nov 11, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Stellar-No Spark

  2. Which is harder...complete engine tear-down and re-build or replacing the spark plugs in an XG350?

  3. Spark plugs and wires for a 2002 EGT

  4. 02 Santa Fe Spark Plugs..2.7 Ltr

  5. 96 Hyundai Accent starter turns but has no spark

  6. White powdery corrosion on OUTSIDE of spark plug - cause of misfire 99 Elentra

  7. spark plugs torque on the 2000 accent

  8. spark plug replacement

Loading...