spark plugs torque on the 2000 accent

Discussion in 'Hyundai Accent' started by Chris, Feb 5, 2005.

  1. Chris

    Chris Guest

    does anyone know how much you should torque the spark plugs on the 2000
    accent (1.5L engine)???

    thank in advance,
    Chris.
     
    Chris, Feb 5, 2005
    #1

    1. Advertisements

  2. Chris

    screwtape iii Guest

    Well, your dealing with an aluminum cylinder head so it's not much. I use a
    3/8" pull handle when putting the plugs in but its overkill. Be sure to
    lubricate the threads on the plug before inserting.
     
    screwtape iii, Feb 5, 2005
    #2

    1. Advertisements

  3. Chris

    Jim Vatunz Guest

    20-30 Nm torque is correct.
    I use antiseize on the threads but i'm not going to swear blind that
    it's the right thing to do. I do it because of some problems i've had
    over the years in a variety of motors.

    For a very plain website try
    http://ii.net/~farmerjim/
     
    Jim Vatunz, Feb 6, 2005
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Which is harder...complete engine tear-down and re-build or replacing the spark plugs in an XG350?

  2. Spark plugs and wires for a 2002 EGT

  3. 02 Santa Fe Spark Plugs..2.7 Ltr

  4. 02 Elantra Spark Plugs

  5. 'Realistically' , when should one change spark plugs on a Santa Fe??

  6. How I change the rear spark plugs for a Santa Fe V6 2001?

  7. Recommended spark plugs for a 60,000 mile 1.6L 2002 Accent?

  8. 2001 XG300 Spark Plugs and the dealer

Loading...