torque specs for 01 accent 1.5L valve cover?

Discussion in 'Hyundai Accent' started by mykeymykey01, Feb 3, 2007.

  1. mykeymykey01

    mykeymykey01 Guest

    mine unscrews itself. does anybody know what the factory torque spec
    is when tightening the valve cover bolts? on a similar note, is the
    accent factory manual info posted anywhere besides the Hyundai
    technology website, somewhere that's free? the Hyundai technology
    website is not very well illustrated or documented and the dealer
    wants 125 clams for the shop manual. is there any information / tech
    source you folks know of where a poor boy like me can find lots of
    technical information (like torque specs, technical illustration,
    wiring diagrams, etc...) on 01 accent? thank you...
    mykeymykey01, Feb 3, 2007

  2. From the web site:

    Install the rocker cover and tighten the bolts to the specified torque.
    Tightening torque
    Rocker cover bolt :

    8-10Nm (, 6-7 lb.ft)

    What else would you need?
    Edwin Pawlowski, Feb 3, 2007
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.