Tucson door panel removal

Discussion in 'Hyundai Tucson' started by zayton, Oct 22, 2009.

  1. zayton

    zayton Guest

    My daughter is wanting to upgrade the speakers in her '05 Tucson;
    speceffically the ones in the rear doors. Does onyone know if there is any
    particular "trick" to the proper removal and replacement of the rear door
    panels? Any special tools needed? Do the panels use replacable attachment
    pins?
     
    zayton, Oct 22, 2009
    #1
    1. Advertisements

  2. zayton

    hyundaitech Guest

    I don't recall removing one of these recently. I believe it's a
    simple matter of removing the attaching screws-- don't forget the one
    in the handle bezel or the ones potentially under trim covers-- and
    then pulling out on the bottom of the panel to detach from the door.
    Lifting the whole panel upward once detached should lift it off the
    window sill. Typically, so few of the fasteners break that you won't
    need replacements to solidly reattach the panel. If necessary, you
    should be able to obtain replacement pins.
     
    hyundaitech, Oct 23, 2009
    #2
    1. Advertisements

  3. zayton

    Alloffroad

    Joined:
    Jun 11, 2019
    Messages:
    6
    Likes Received:
    0
    Try, after removing all screws, sliding the panel forward then up. I think that is how i did mine on my 05
     
    Alloffroad, Jun 11, 2019
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.