Washer nozzel front and rear wiper blade

Discussion in 'General Motoring' started by Jessye, Jan 31, 2018.

  1. Jessye

    Jessye

    Joined:
    Jan 31, 2018
    Messages:
    2
    Likes Received:
    0
    Hey guys/girls I have a 2010 Hyundai Elantra touring I am having issues with my washer nozzel in the front they spray but not high enough I've looked in my haynes manual how to adjust them but no content on the nozzels at all I've tried the pin thing but nothing changes and as for my rear wiper blade it just stopped working one day it needed assistance going past half then the other way back I had a wet window at the time so it wasn't resistance and now it won't move at all I'm just wondering how to access the wiper motor to change it or test it I might add it died when my after market stereo quit working along with my dash camera my installer said replace the battery for the car I replied said battery and still not working either the camera wiper blade or stereo any help would be appreciated thanks
     
    Jessye, Jan 31, 2018
    #1
  2. Jessye

    avisitor

    Joined:
    Jul 30, 2017
    Messages:
    426
    Likes Received:
    24
    Location:
    Albany, NY
    I think you should check all fuses and relays
    There are two places that I know of ...
    One is in the engine bay ... usually near the battery
    The other is in or under or on the side of the dash
    You can check fuses by using the fuse puller and pulling then out and inspecting them

    Good luck
     
    avisitor, Feb 1, 2018
    #2
  3. Jessye

    Jessye

    Joined:
    Jan 31, 2018
    Messages:
    2
    Likes Received:
    0
    Awesome thank you I'll check that as soon as it gets warmer out
     
    Jessye, Feb 3, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.