Windshield Wipers

Discussion in 'General Motoring' started by Michael & Rizza, Nov 26, 2005.

  1. At the risk of setting the record for the stupidest question, but here goes.

    On a 2004 Elantra, it appears that in order to change the windshield wiper
    blades, one has to change the entire arm assembly. It appears that the
    blade part itself is riveted onto the arm. Or else my fever is not
    completely gone and I am seeing things funny.


    Michael
     
    Michael & Rizza, Nov 26, 2005
    #1
  2. Michael & Rizza

    irwell Guest

    No, it is taken off from the assembly, it takes a lot of puzzling
    out, for me anyway. I replaced the blades on my 2001 with
    some from Kragen's, took me about twenty minutes to puzzle out
    how to do it, one of those things that you only do every two years
    or so.
     
    irwell, Nov 26, 2005
    #2
  3. Michael & Rizza

    hyundaitech Guest

    There's a little plastic tab you press in on the underside of the
    connector
    that attaches the blade to the arm.
     
    hyundaitech, Nov 28, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.