ABS cycling?

S

shrinkwrap

Joined
Aug 30, 2021
Messages
3
Reaction score
0
Hello. New to this forum. I'll be changing the brakes and at least 1 caliper on my 2012 Sonata Hybrid, and I was wondering if there is any special bleeding procedure, such as the need for a special code reader? Thanks!
 
If you get air in the master cylinder / abs unit while bleeding the calipers, you will need a scan tool that supports abs bleeding on your model. I have a Launch 9081 that supports my 2012, but I have never used that function.
You must make sure that the reservoir does not get too low while bleeding the calipers, or you will need the tool
 
S-petersen said:
If you get air in the master cylinder / abs unit while bleeding the calipers, you will need a scan tool that supports abs bleeding on your model. I have a Launch 9081 that supports my 2012, but I have never used that function.
You must make sure that the reservoir does not get too low while bleeding the calipers, or you will need the tool
Click to expand...
Thanks. I was careful to not get air in the MC. Since I changed all 4 calipers it took a lot of fluid, but everything is good. Thanks for the reply.
 
Back
Top